Loading...
Serving Marshall, TX and surrounding areas. (430) 214-0042
Marshall Concrete Polishing & Epoxy Flooring handles everything from garage epoxy to commercial polished concrete - done right the first time, with proper prep and materials built for East Texas heat and humidity.
Marshall Concrete Polishing & Epoxy Flooring is a licensed concrete flooring contractor serving Marshall, TX and the surrounding region. We offer 16 services covering every type of concrete floor - from residential garage coatings to commercial polished concrete and industrial urethane systems - and we work across 12 cities in East Texas. Every project starts with proper surface preparation, because that is the single factor that determines whether a coating lasts or fails in this climate.
Bare concrete absorbing every stain? Epoxy bonds to the slab and creates a hard, sealed surface that wipes clean with a mop.
Learn More
Dusty, cracked warehouse floors cost you time and create safety hazards. Commercial epoxy seals the surface and adds slip-resistant grip.
Learn More
Oil stains, cracks from shifting clay soil, and slick wet concrete are all fixed with a professionally applied garage floor coating.
Learn More
Polyaspartic cures in hours instead of days, resists UV yellowing, and handles East Texas heat without losing its bond.
Learn More
Want a floor that looks like a showroom? Metallic epoxy creates a one-of-a-kind finish with depth and movement built into the coating.
Learn More
Kitchens, breweries, and food-processing floors need a surface that handles chemical exposure and standing water. Urethane cement is built for it.
Learn More
Polished concrete turns a dull gray slab into a smooth, reflective surface that is easier to clean and looks sharp for years.
Learn More
Add color and character to any concrete floor with acid stain or dye - permanent color that does not peel or chip like paint.
Learn More
Terrazzo brings a classic, high-end look to commercial lobbies and residential spaces with a floor that lasts decades.
Learn More
A damp, stained basement floor is uncomfortable and hard to use. The right coating seals out moisture and makes the space livable.
Learn More
Proper surface grinding is what separates a coating that lasts from one that peels. We spend the time the prep work requires.
Learn More
A quality sealer protects concrete from moisture, stains, and freeze-thaw damage without changing the look of the slab.
Learn More
Cracked or worn-out concrete does not always need to be replaced. Resurfacing overlays restore the surface at a fraction of the cost.
Learn More
Uneven or sunken concrete floors cause problems downstream. Self-leveling overlays create a flat, smooth base before any finish goes down.
Learn More
A slippery or deteriorating pool deck is a safety risk. Deck coatings add grip, seal the surface, and refresh the look in one step.
Learn More
Old paint, failing coatings, or adhesive residue have to come off completely before new work goes down. We handle the removal.
Learn MoreReach out by phone or the contact form. We will ask a few basic questions about your space - size, current condition, and what you are hoping to accomplish. We respond within 1 business day and schedule a free on-site estimate at a time that works for you.
We visit in person, inspect the concrete for cracks, moisture, and contamination, and test for moisture - which matters more here than in drier climates. You receive a written estimate that spells out exactly what is included: prep work, number of coats, crack repair, and timeline. No hidden line items.
On day one, the crew grinds the surface, fills every crack, and cleans the slab. On day two, the coating goes down in layers. We walk you through the finished floor before we leave and explain exactly how to care for it going forward. The project runs on schedule - no stalled jobs, no disappearing crews.
We carry general liability insurance on every project and hold the required Texas contractor registration. Ask to see both before any work begins - we will have them ready.
Every estimate is written, itemized, and free. You will see prep, materials, coats, and timeline before you decide anything. No pressure, no expiring discounts, no bait-and-switch pricing.
We have been working in Harrison County since 2018. We know how the clay soil moves here, when humidity peaks, and what products hold up through an East Texas summer.
Moisture coming up through a slab is the number-one reason coatings fail in East Texas. We test before we coat - every time - because a floor that fails six months later is not acceptable work.
Ready to get started? Request a free estimate or call us at (430) 214-0042.
"They spent a full day just on prep before a drop of coating went down. My garage floor had years of oil stains and a few cracks from the soil shifting. Three years later it still looks the same as the day they finished it."
David K., Marshall - Epoxy Floor Coatings
"We had the warehouse done over a long weekend so we did not lose production time. The crew worked around our schedule, finished on time, and the floor has held up through two summers without any peeling or bubbling."
Lisa M., Longview - Commercial Epoxy Floor Coatings
"I wanted polished concrete in my living room addition and was not sure anyone local could do it. They came out, looked at the slab, and walked me through exactly what the finish would look like. It came out better than the photos I showed them."
Angela T., Hallsville - Polished Concrete Flooring
We respond within 1 business day - no waiting around. There is no obligation to submit - it is just the fastest way to get a real number for your project. After you send the form, someone from our office will call you to schedule a free on-site estimate at a time that works for you.
Marshall Concrete Polishing & Epoxy Flooring is based in Marshall, TX and serves 12 cities across East Texas, including Longview, Kilgore, and Henderson. Most projects can be scheduled within the same week. We work throughout Harrison County and the surrounding area - if you are within our service region, call or submit the form and we will confirm availability.
Water vapor moving up through concrete breaks the bond between the slab and the coating, causing bubbles and peeling within months. In East Texas, where clay soils hold water and humidity stays high, testing for moisture before coating is not optional - it is the most important step in the job. The Portland Cement Association covers moisture in concrete slabs in detail for homeowners who want to dig deeper.
Yes. A single-coat system is thinner and wears out faster under vehicle traffic and heavy use. A three-coat system - primer, color coat, clear topcoat - builds thickness and locks in the color so it does not fade or scratch as easily. If a quote seems unusually low, ask how many coats are included.
October through April is the ideal window in the Marshall area. Summer temperatures above 95 degrees can cause epoxy to cure too quickly and bubble if applied to an overheated slab. Experienced contractors schedule around the heat or take steps to control conditions inside the space before applying.
Watch the first day. A contractor doing it right spends most of that day grinding the concrete with real equipment - not just a quick sweep and acid wash. You should hear loud machinery and see dust collection in use. If a crew finishes "prep" in under an hour and starts coating the same morning, ask questions.
Concrete outperforms asphalt in this climate for surfaces that need coating. Asphalt softens in sustained heat and does not accept floor-grade coatings. Concrete stays rigid, can be ground and prepared properly, and holds coatings far longer than asphalt alternatives for garage, shop, and commercial floors.
A good estimate lists: square footage, prep method (grinding or shot-blast), crack repair scope, number of coats, product brand and line, timeline, and total price. If any of those are missing, ask for them. A contractor who cannot explain what they are applying is not someone you want on your floor.
Marshall Concrete Polishing & Epoxy Flooring is a licensed and insured concrete flooring contractor based in Marshall, TX, serving Harrison County and 12 surrounding cities since 2018. We hold the required contractor registration with the Texas Department of Licensing and Regulation and carry general liability coverage on every project.
Since 2018, we have completed projects across East Texas covering all 16 services in our catalog - from residential garage coatings to industrial urethane cement systems. Every job starts with a proper written estimate and ends with a walkthrough of the finished floor.
Want to learn more about how we work? Read more about the business here.
If your concrete is structurally sound but has surface scaling, minor cracks, or years of staining, resurfacing with an overlay costs far less than replacement and gives you a fresh base for a coating system. Replacement makes sense only when the slab itself has failed structurally.
The coating bubbles, peels, or delaminates - often within the first wet season. Once this happens, the failed coating has to be fully stripped before anything new can go down. Stripping is time-consuming and adds cost. The Concrete Network has a solid overview of moisture-related coating failures for homeowners doing research before hiring.
Regular sweeping and occasional mopping with a mild cleaner is all most coated floors ever need. Avoid dragging sharp metal objects across the surface and clean up chemical spills - like motor oil or battery acid - promptly. There is no annual sealing or waxing required for a professionally applied system.
Still have questions about your specific floor? Call us at (430) 214-0042 or submit a request online and we will walk you through the options.
Marshall is the county seat of Harrison County and sits in the heart of the East Texas Piney Woods, surrounded by pine and hardwood forests. The city has a population of roughly 22,000 to 23,000 and serves as a regional hub for commerce, healthcare, and services across Harrison County and the surrounding rural area. A significant share of the city's housing stock was built before 1980, which means many homeowners here are working with older slabs that have never been coated or sealed.
Marshall is home to Wiley College, one of the oldest historically Black colleges west of the Mississippi, and East Texas Baptist University - two institutions that anchor the local economy and keep the city from depending on any single employer. The city is also known for the Wonderland of Lights, an annual Christmas festival that draws visitors from across the region and has earned Marshall the name "Christmas Capital of Texas."
Just east of town lies Caddo Lake, the only naturally formed lake in Texas - a cypress-lined destination for fishing, boating, and wildlife watching that draws residents and visitors from across the state. Whether your home or business is near downtown, close to campus, or out toward Caddo Lake, Marshall Concrete Polishing & Epoxy Flooring serves all of Marshall and the surrounding region.
By appointment only, no walk-ins.
Marshall Concrete Polishing & Epoxy Flooring
305 Adkins St
Marshall, TX 75670
quotes@marshallconcretepolishingandepoxyflooring.com
Always open, 24/7.
Call Marshall Concrete Polishing & Epoxy Flooring for a free on-site estimate in Marshall and across East Texas.